The domain of electric power is as much dependent on power cable accessories as power cables themselves. These accessories have to be strong, durable, capable of withstanding external forces such as weather and safe and easy to use. At Compaq International, we produce top quality power cable accessories including heat and cold shrink cable joints and terminations for power cables from 1.1kV to 72.5kV. Here is a glimpse of the range of our products -

1. Heat Shrink Cable Terminations - Our range of heat shrink cable terminations include 1 and 3 core terminations for Polymeric Insulated Cables up to 66KV, Paper Insulated (PILC) Cables up to 36KV, Aerial Bunched (ABC) cables up to 36kV.

2. Cold Shrink Cable Terminations - Our Cold Shrink Cable Terminations are suitable for 1 & 3 Core Polymeric Insulated (XLPE/ EPR) Cables up to 36kV. They can be used with both compression and mechanical type connectors.

3. Premoulded (Push On/Slip On) Cable Terminations - These termination kits go well with all types of single and three core Polymeric (XLPE/EPR) Insulated cables. Suitable for both compression and mechanical type lugs, these terminations can fit various cable cross sections up to 400mm2.

4. Screened separable connectors - These are touchproof connectors used for connecting single and three core polymeric cables to medium voltage switchgear, RMU and other equipment using bushings type "C" specified for 630A, 800A. 1250A up to 42kV. The connectors are highly durable as they are made of highly modified EPDM rubber. The touchproof outer conductive screen connected to earth gives them a high level of protection.

5. Heat Shrink Cable Joints - We have high quality and durable armoured and unarmoured heat shrink cable joints that are suitable for Polymeric (XLPE, PVC, EPR) Cables up to 72.5KV. Other products in this category include Heat Shrink Straight through joints suitable for XLPE/EPR/PVC insulated cables up to 66kV, Heat Shrink Straight through transition joints up to 36kV, Heat Shrink Straight through joints suitable for PILC Cables up to 36kV, Heat Shrink Trifurcating Cable joint up to 36kV, Heat Shrink Straight through Joint suitable for 1 Core Aerial Bunched (ABC) cables up to 36kV.

6. Cold Shrink Cable Straight Joints - These cold shrink straight joints are perfect for connecting either single or three core cables designed with polymeric (XLPE or EPR) insulation. They are made of silicon rubber material which offers great electrical insulation and weathering properties, and their use is suitable for both compression and mechanical type connectors.

7. Pre-moulded Cable Joints - Our Premoulded (Push On/Slip On) Cable Joint Kits are suitable for all types of single and three core Polymeric (XLPE/EPR) Insulated cables. They can be used with various cable cross sections up to 400mm2 and are fit for both compression and mechanical type connectors. Their one piece design makes them really easy to install, and they come with integrated stress control arrangements.

Not only does Compaq International offer top-of-the-class and reliable power accessories, but we also provide comprehensive pre-sales and post-sales support so that you never face any problem while selecting or using our products. You can check out our entire range of products here. For queries and comments, write to us - http://www.compaqinternational.com/contact.php.